• <nav id="9a8xm"></nav>
        1. <form id="9a8xm"></form>
        2. 重型軋機

          重型軋機

          dy.jpg

          各齒輪均采用硬齒面和磨齒工藝;

          All gears adopt hard tooth surface and grinding process;

          ?

          各傳動軸均采用加強型設計;

          All transmission shafts adopt reinforced design;

          ?

          采用大直徑軋輥,軋輥直徑¢104,與傳統軋輥相比,更易咬入,相同產能下可獲得更低的轉速和更高的強度;

          Large-diameter rolling rolls are used, with a roll diameter of ¢104. Compared with traditional rolling rolls, they are more easily bitten into, and under the same production capacity, lower speed and higher strength can be obtained.

          ?

          各部件的密封和潤滑都采用雙層密封;

          All parts are sealed and lubricated with double-layer sealing;

          ?

          電機功率22KW,配齒輪減速箱與主箱體直連,并采用變頻調速;(變頻器品牌為臺達)

          The motor power is 22KW, and it is directly connected to the main gearbox with a gear reduction box, and uses frequency conversion speed regulation; (The brand of the frequency converter is Delta)

          ?

          軋線范圍:¢16¢5.5,一個主箱,八個分箱。軋制速度:最快每分鐘出線64米。

          Rolling range: ¢16¢5.5, one main box, eight sub-boxes. Rolling speed: the fastest output speed is 64 meters per minute.



          廣州精準機械有限公司

          地址:廣州市黃埔區茅崗路828號廣州機械科學研究院30號樓

          GUANGZHOU JINGZHUN MACHINERY CO., LTD.

          Guangzhou Mechanical Engineering Research Institute,No. 828, Maogang Road, Huangpu District, Guangzhou

          精信(樂(lè )昌)機械有限公司

          地址:廣東省樂(lè )昌市經濟開發區環園東路17號

          JINGXIN(LECHANG) MACHINERY CO., LTD.

          No.17, Huanyuan East Road, Lechang Economic Development District, Guangdong


          電話:+860-20-32388019 / +860-751-5559268

          傳真:+860-20-32388021

          郵箱:gdjzjx@163.com

          網址:gzjingzhun.com

          版權所有 廣州精準機械有限公司     備案號: 粵ICP備13027984號

          免费黄色资源不卡在线一区|亚洲人成网站在e线播放|久久青草精品38国产|国产尤物福利在线不卡
        3. <nav id="9a8xm"></nav>
              1. <form id="9a8xm"></form>